|
METRIC Product Data & Dimensions:
(nominal)
Flooring sheets:
Flooring sheets: 122cm(l) x 107cm(w) x 5.2cm(h)
(1.3 sq.meter/sheet, 42 sq. meter/pallet)
overlapping traction arcs raised 32mm above surface
96mm inch drain holes
Weight:
15.4kg per assembled sheet
512kg per full pallet
(32 sheets per pallet)
Cubic Displacement:
.06 cu. meter per sheet
2.32 cu. meter per full pallet
(full pallet = 107cm x122cm x 182cm)
Material:
High density polyethylene
Color:
Black
Sand (camouflage tan)
Maintenance:
Water wash or sweep periodically to remove accumulated
debris if desired.
Installation:
Flooring factory pre-assembled 1.22 meter by 1.07 meter
sheets. Each sheet consists of two .61 meter by 1.07 meter
panels.
Installation requires no electricity, tools, nails,
fasteners, or specialized training.
Sheets may be disassembled for use as single panels or for
shipment in tight spaces. |
Warranty:
Flooring is warranted by the manufacturer against structural
failure due to splitting, cracking, or damage caused by
insects, rot, corrosion or fungal decay for a period of 5
years from date of purchase. The manufacturer will replace
any sheet that fails to perform to its original function due
to any of the above conditions when installed and used in
accordance with manufacturer's specifications.
 |
MATERIAL SAFETY DATA
Material: High Density Polyethylene
Chemical Family: Polymer
HAZARDS IDENTIFICATION
NFPA Ratings: National Fire Protection Association (NFPA)
Hazard Scale:
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious;
4 = Severe; * = Chronic hazard
Health: 0
Fire: 1
Reactivity: 0
SARA 311 Categories:
1.Immediate (Acute) Health Effects No
2.Delayed (chronic) health effects No
3.Fire hazard No
4.Sudden release of pressure hazard No
5.Reactivity hazard No
REACTIVITY
Reactivity is classified as minimal, but may react
with strong oxidizing agents.
Avoid contact with organic solvents. May react with
free halogens.
TOXICOLOGICAL INFORMATION
The material from which this product is made is
inert and non-toxic. If this product is burned,
fumes may be unpleasant and produce nausea and
irritation of the upper respiratory tract.
Contact with hot or molten material may cause burns.
Burns should be treated as thermal burns.
FLAMMABILITY CLASSIFICATION
Fire Classification: Not flammable or combustible (OSHA
HCS 29-CFR-1910.1200).
Flammability Class: Not flammable (UL-94HB).
Upper flammability limit: N/A
Lower flammability limit: N/A
Auto Ignition: 330°C-410°C (630°F-770°F)
General Fire Hazards: May support combustion, but
does not meet combustible definition.
PHYSICAL AND CHEMICAL PROPERTIES:
Melting Point: 122°C (252°F)
Solubility: Insoluble in water.
Specific Gravity: 0.95
Brittleness Temperature: -75°C (-103°F)
ECOLOGICAL INFORMATION:
Recyclable: Yes. Long service life but may be
recycled several times.
Ecotoxicity: This material is insoluble in water so
not harmful to aquatic organisms.
Environmental fate: This material is not readily
biodegradable.
Disposal: Approved landfill or incinerator.
TRANSPORT INFORMATION
Not DOT regulated.
The information above has been gathered from
standard references and/or resin supplier
test data and is, to the best of our knowledge and
belief, accurate.
|
|
|
